Contact: sales@reachmachinery.com
The locking element is a keyless connection device, the principle of which is through the tension of high-strength bolts, between the inner ring and the shaft, and between the outer ring and the hub, There is a huge holding force between them, realizing a keyless connection.
keyless connection Installation:
First, put three screws into the screw bores of the flange during installation, then open the inner sleeve and the outer sleeve,
Then put the locking element into the hole in the design position, and put them on fixed.
The method of tightening is that each stud only grasps the fixed torque (note: the order of tightening is bounded by the beginning of the seam, and the tightening is symmetrical).
However, traditional key connection setups use physical keys (such as screws, nuts, sales pegs, etc.) to connect devices or components, which need to be manually inserted and tightened.
Differences between keyless connection and traditional connection
Installation and removal: Traditional keyed connections require a relatively complex installation process, including steps such as inserting, rotating, or tightening the key. The keyless connection device of the locking devices is usually simpler and faster, and the connection can be realized by simple alignment and pressure, and it is more convenient to disassemble.
Handling Requirements: Traditional keyed connections may require specific tools or skills for installation and removal. The keyless connection device usually does not require special tools, is simpler to use, and can even be automated.
Generally speaking, the keyless connection is a pretty good connection method . And it relies on friction transmission, and there is no keyway weakening of the connected parts, there is no relative movement, and there will be no wear and tear during work.
Post time: May-17-2023